ASTM Carbon Steel Seamless Pipes

Product Details:

HI-Tech is one of the Leading Stockiest - Supplier - Suppliers - Importer - Trader of Carbon Steel ASTM A 106 GRADE GB. B IBR Pipes.

Carbon Steel IBR Pipes & Tubes: Approved under the India Boiler Regulation Act along with the form 3A/3D.

• ASTM A 106 Gr. B , IBR
• LT Seamless Pipe , ASTM A 333 Gr.6
• Carbon Steel Seamless Boiler Tube IBR BS 3059
• Part II / CDS / 360, BS / 3059/ Part II / HFS / 360
• ASTM A 210 Din 17175 St 35.8
• Heat Exchanger Tube ASTM A 179
• API Line Pipes API 5L Gr. B / PSL Gr x 52
• ERW Boiler Tubes IBR BS 3059 / Part I – 320
• Size Range : 6 mm NB To 24' NB
• Thickness : SCH 40, SCH 80, SCH 160, SCH XXS
• length : 6 mtr & Double random Length

The steel shall be killed steel, with the primary melting process being open-hearth, basic-oxygen, or electric-furnace, possibly combined with separate degassing or refining. If secondary melting, using electroslag remelting or vacuum-arc remelting is subsequently employed, the heat shall be defined as all of the ingots remelted from a single primary heat.

• 4.2 Steel cast in ingots or strand cast is permissible. When steels of different grades are sequentially strand cast, identification of the resultant transition material is required. The producer shall remove the transition material by any established procedure that positively separates the grades.
• 4.3 For pipe NPS 11⁄2 and under, it shall be permissible to furnish hot finished or cold drawn. 4.4 Unless otherwise specified, pipe NPS 2 and over shall be furnished hot finished. When agreed upon between the manufacturer and the purchaser, it is permissible to furnish colddrawn pipe.

Hot-finished pipe need not be heat treated. Cold-drawn pipe shall be heat treated after the final cold draw pass at a temperature of 1200°F (650°C) or higher. Weight—The weight of any length of pipe shall not vary more than 10 % over and 3.5 % under that specified. Unless otherwise agreed upon between the manufacturer and the purchaser, pipe in NPS 4 and smaller may be weighed in convenient lots; pipe larger than NPS 4 shall be weighed separately.

• 16.2 Diameter—The tolerances for diameter shall be in accordance with the following:
• 16.2.1 Except for pipe ordered as special outside diameter tolerance pipe or as inside diameter tolerance pipe, variations in outside diameter shall not exceed those prescribed in Table 5.
• 16.2.2 For pipe over 10 in. (254 mm) OD ordered as special outside diameter tolerance pipe, the outside diameter shall not vary more than 1 % over or 1 % under the specified outside diameter.
• 16.2.3 For pipe over 10 in. (254 mm) ID ordered as inside diameter tolerance pipe, the inside diameter shall not vary more than 1 % over or 1 % under the specified inside diameter.
• 16.3 Thickness—The minimum wall thickness at any point shall not be more than 12.5 % under the nominal wall thickness specified.

Keywords:

• 26.1 Carbon steel pipe
• Seamless steel pipe
• Steel pipe

Additional Information:

• Item Code: A-106

Product Details:

This specification covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1/8 to NPS 26. The steel categorized in this standard must be open-hearth, basic-oxygen or electric-furnace processed and must have the following chemical requirements: carbon, manganese, phosphorus, sulfur, copper, nickel, chromium, molybdenum, and vanadium. The tubing shall undergo a seamless or welding process. Tension, bend, and flattening tests shall be performed to make sure that it must adhere to the mechanical properties of the standard. The hydrostatic test shall be applied, without leakage through the weld seam or the pipe body. Nondestructive electric test shall be made to make sure that the full volume of the pipe must be in accordance with the standard. The purchaser shall have the right to perform any of the inspections and tests set forth in this specification where deemed necessary to ensure that the pipe conforms to the specified requirements.

ASTM A53 Grade B carbon steel pipes are widely available and relatively affordable, making it a popular choice for very large projects such as pipelines. METLINE stocks and supplies full range of ASTM A53 Grade B pipes and tubes. ASTM/ASME A53/SA53 grade seamless pipes is one of our most widely used grade of carbon steel and is readily available ex-stock for all standard thicknesses up to SCH160. Metline is a reputed distributor of ASTM A53 Grade B pipes manufactured by manufacturers in India such as MSL, ISMT and JINDAL SAW.

ASTM/ASME A53/SA53 carbon steel seamless pipes are used in industrial applications involving high heat, including process piping, boiling plants, compression stations and refineries.

Product Details:

We are Supplier Stockiest Mumbai of SS Tubes and pipes which are supplied by us are manufactured by the top quality of raw material. These products are presented in different shape and sizes and they are applicable both for engineering and industrial purpose. We manufacture these products using the modern machines and investigate the quality of the products before they are supplied to our clients to ensure that we are providing the high grade products to our clients.

 

Features:

• High dimensional accuracy
• Sturdy construction
• Corrosion resistant

We have our distributor of Black Pipe, API 5L Gr.B Carbon Steel Pipe, Tubes in SAUDI ARABIA, IRAN, IRAQ, UNITED ARAB EMIRATES (UAE), QATAR, DUBAI, ABU DHABI, BAHRAIN, OMAN, INDIA, KUWAIT, TURKEY, YEMEN, SYRIA, JORDAN, CYPRUS, PORTUGAL, RUSSIA, NORWAY, GERMANY, FRANCE, EGYPT, SINGAPORE, MALAYSIA, INDONESIA, THAILAND, VIETNAM, SOUTH KOREA, CHINA, JAPAN, SRI LANKA, MALDIVES, BANGLADESH, MYANMAR, TAIWAN, CAMBODIA, MALTA, ITALY, UNITED KINGDOM (UK), SPAIN, UKRAINE, NETHERLANDS, THE REPUBLIC OF CONGO, ARGENTINA, BOLIVIA, BRAZIL, CHILE, VENEZUELA, COLOMBIA, ECUADOR, GUYANA, PARAGUAY, ISRAEL, ALBANIA, AUSTRALIA, PERTH, TANZANIA, FINLAND, BELGIUM, GREECE, CZECH REPUBLIC, IRELAND, CROATIA, SLOVENIA, EQUATORIAL GUINEA, UNITED STATES OF AMERICA, CANADA, MEXICO, PANAMA, COSTA RICA, PUERTO RICA, TRINIDAD AND TOBAGO, JAMAICA, BAHAMAS, DENMARK, SWITZERLAND, SLOVAKIA, NIGERIA, ALGERIA, ANGOLA, SOUTH AFRICA, LIBYA, GABON, PHILIPPINES, SUDAN, ROMANIA, POLAND, KAZAKHSTAN for quick delivery, we supply API 5l grade b X52 PSL-1 & PSL-2 line pipe in seamless. API 5L Grade B carbon steel seamless pipes with mill certificate in Dubai.

Origin: Indian Origin, Japanese Origin, Korean Origin, European Origin, US Origin, Ukraine Origin, Russian Origin

We are Manufacturer, Stockist, Dealer, Trader, Supplier, Exporter and Vendor of IBR Steel Pipes Tubes in Bombay/ Mumbai.

Product Details:

ASTM A106 Grade B Pipes is the most common grade used in oil ad gas industries,manufactured by basic-oxygen or electric-furnace processed and must have the following chemical requirements: carbon, manganese, phosphorus, sulfur, copper, nickel, chromium, molybdenum, and vanadium. The tubing shall undergo a seamless or welding process. Tension, bend, and flattening tests shall be performed to make sure that it must adhere to the mechanical properties of the standard.
This pipes generally manufactured by triple grade specification ASTM A106 GRB,API5L GR B,ASTM A 53 GRB PIPES

Specifications:

• Size Range: Nominal Size 1/2' to 24'
• Manufacturing Process :Smls
• Thickness: Sch 10 Ro Sch Xxs
• Dimensional Standard: B36.10
• Nace: MR 0175 compliance
• Finish: Hot Dip Galvanized/Black

Product Details:

We have full devout in manufacturing and supplying ASTM Carbon Steel Seamless Pipes which are known for high sturdiness and dimensional accuracy. Our offered pipes are well known among our customers for their high toughness and uniform dimensions. The fabrication of these products is done by using quality tested steel and numerically controlled high-end machines. Moreover, we deliver our products to the customer with utmost perfection in durable packaging standards.

Features:

• High durability
• Superior finishing
• Rust proof

We are Manufacturer, Stockist, Dealer, Trader, Supplier, Exporter and Vendor of ASTM Carbon Steel Seamless Pipes in Bombay/ Mumbai.

Product Details:

Steel Pipes And Tubes ASTM 2205 is one of the most recognized and widely used duplex stainless steel grade, with excellent general corrosion resistance and superiority over grade 304 or 316 in most environments. We Supply various grades of duplex stainless steels including UNS 31803 (F51) and UNS 32205 (F60) Alloy 2205. The ratio of ferrite to austenite in Duplex stainless steel is approximately 50:50.

The characteristic feature of duplex stainless steels is their dual phase microstructure, comprising of approximately 50% of austenitic and 50% of ferrite. The yield strength of duplex stainless steel is typically double that of austenitic stainless steel.

 

Product Details:

We are the supplier and stockist of Sumitomo SS Pipes and Tubes.

Product Details:

Key Applications for ASTM A213/ASME SA213 T2, T11, T12, T22, T91, T92 Seamless Steel Tubes

1. Manufacturing Boilers
2. Superheaters
3. Heat Exchangers

ASTM A213/ASME SA213 T2, T11, T12, T22, T91, T92 Seamless Steel Tubes Specifications, Stock and Supply RangeAlloy Steel Tubes/Tubing

1. Size Range: 1/2” OD up to 5” OD, customs diameters also available
2. Thickness Range: SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All Schedules, upto 12mm thk
3. Alloy Steel Tubes Specifications: ASTM A/ASME SA 213 T5, T9, T12, T22, T23, T91, T92

End Connections for Line Pipes: Plain, Bevel, Screwed, Threaded

Type: Seamless / ERW / Welded / Fabricated / CDW

Form: Round Pipes/Tubes, Square Pipes/Tubes, Rectangular Pipe/Tubes, Coiled Tubes, “U” Shape, Pan Cake Coils, Hydraulic Tubes

Length: Single Random, Double Random & Required Length, Custom Size – 12 Meter lengths

End: Plain End, Beveled End, Threaded

End Protection: Plastic Caps

Outside Coating: Black Painting, Anti-Corrosion Oil, Galvanised Finish, Finish as per customer Requirements

Inspection, Test Reports: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports, India Boiler Regulations (IBR) Test Certificate

Product Details:

ASTM A53 pipe (also referred to as ASME SA53 pipe) is intended for mechanical and pressure applications and is also acceptable for ordinary uses in steam, water, gas and air lines. It is suitable for welding and for forming operations involving coiling, bending, and flanging, subject to certain qualifications
Scope

ASTM A53 pipe covers Seamless and Welded, Black and Hot-Dipped Galvanized nominal (average) wall pipe for coiling, bending, flanging and other special purposes and is suitable for welding. Continuous-Welded pipe is not intended for flanging. Purpose for which pipe is intended should be stated on order.

A53 Pipe Specifications A/SA53 NPS 1/8″ – 26″ Schedules 10 through 160, STD, XH and XXH

Product Details:

We are an eminent organization engaged in offering carbon steel seamless pipes, which are in-line with the established quality standards. These pipes are uses in engineering, water, gas & sewerage; water wells and lancing pipes and other automotive applications. Under the offered range, we provide seamless pipes (API 5L Gr. X 56 PSL I)andseamless pipes (API 5L grade X60 PSL II). To ensure the higher level of patron satisfaction, we manufacture thee seamless pipes as per the details given by them.

 

 

Standard:- DIN 1626/169/17175/17179/17204/2391/2393/2394/17120/17172

Grade:- ST 33, ST34.2, ST 35, ST 35.8, ST 37.0 ST 37.2, ST 37.4, ST 44, ST 44.2, ST 44-3N, ST 44.0, ST 45.8, ST 52.0, ST 52.3, ST 52-3N, 15MO 3,13 CR MO4.4, 10 CR MO9.16, ST 52.4, ST E290-7, STE360-7, STE415-7.

Standard:- EN 10207-1/10210-1/102016-1/2/3/10297-1(seamless),10305-1/2/3/10210 (seamless round pipe), 10208-1(class A), 10208-2(classB).

Grade:- P 195/235/265-TR1/2,P195/235/265-GH,16MO3, 13CR MO 4 5, 10 CR MO 9.10, P275-NL-1/2 ,P 355-N/NH,E 155/195/125/220/235/260/275/320/355,S 235 JRH,S275/355-J2H,L235/245/290/360-GA,L245/290/360/415-NB

Sizes:-

Seamless -1/4’’NB TO 28’’NB

Thickness - SCH 40 TO SCH XXS & higher

ERW / HFW - ½’’ NB TO 30’’NB

HSAW - 8’’NB TO 100’’ NB

EFSW - 16’’ NB TO 54’’ NB (8MM TO 50MM THK)

Supplementary Requirement:-

NACE MR0175, MR 0103, ISO:3183,NACE TM 0284, source service, HIC, SSC tested, impact test at 50 degree celcius,

3 Layer polyethylene coating

3 Layer polypropylene coating,

Radiography (XRAY),bead crush

Delivery Condition:

Assrolled/annealed/normalized

Stress relived /quenched & tempered

Certificate:

EN 102043.1 & EN 10204 3.2

Product Details:

Carbon steel pipes & tubes are manufactured by us and available at competitive market price. Carbon steel pipes & tubes are widely used in several industries. We provide different sizes to the clients as per their specifications. astm a 106 grade gr. B pipes & tubes.

We are Manufacturer, Stockist, Dealer, Trader, Supplier, Exporter and Vendor of ASTM A 106 Gr.A Pipes in Bombay/ Mumbai.

Product Details:

Driven with perfection, we are engaged in catering to the variegated requirements of the customers by bringing forth a comprehensive Carbon Steel Pipes (ASTM A 333 GR 2). quality-approved raw material like steel and allied components are utilized in the manufacturing process of these pipes, which is carried out at our state-of-the-art infrastructure facility. In addition, these pipes are tested on various characteristics to ensure flawlessness.

We are Manufacturer, Stockist, Dealer, Trader, Supplier, Exporter and Vendor of Carbon Steel ASTM A333 GR 2 Seamless Pipes in Bombay/ Mumbai.

Product Details:

Carbon steel pipes & tubes are manufactured by us and available at competitive market price. Carbon steel pipes & tubes are widely used in several industries. We provide different sizes to the clients as per their specifications. astm a 106 grade gr. B pipes & tubes.

We are Manufacturer, Stockist, Dealer, Trader, Supplier, Exporter and Vendor of ASTM A 106 Gr.C Pipes in Bombay/ Mumbai.

Product Details:

ASTM A333 Grade 6 Steel Pipes, ASTM A333 Low Temperature Grade 6 Steel Tubes Specifications, Stock and Supply Range

ASTM A333 Grade 6 Carbon Steel Pipes

1. Size Range: 1/2” NB to 36” NB
2. Thickness: SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All Schedules
3. Applications: Oil Refineries, Petrochemicals, Power Generation (Nuclear/Thermal), Steel, Sugar, Boiler Equipments, Pressure Vessels and General Engineering Purposes

End Connections for Line Pipes: Plain, Bevel, Screwed, Threaded

Type: Seamless / ERW / Welded / Fabricated / CDW

Form: Round Pipes/Tubes, Square Pipes/Tubes, Rectangular Pipe/Tubes, Coiled Tubes, “U” Shape, Pan Cake Coils, Hydraulic Tubes

Length: Single Random, Double Random & Required Length, Custom Size – 12 Meter lengths

End: Plain End, Beveled End, Treaded

End Protection: Plastic Caps

Outside Coating: Black Painting, Anti-Corrosion Oil, Galvanised Finish, Finish as per customer Requirements

Inspection, Test Reports: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports, India Boiler Regulations (IBR) Test Certificate

Product Details:

Approved under the India Boiler Regulation Act along with the form 3A/3D. ASTM A 106 Gr. B , IBR LT Seamless Pipe , ASTM A 333 Gr.6 Carbon Steel Seamless Boiler Tube IBR BS 3059 Part II / CDS / 360, BS / 3059/ Part II / HFS / 360 ASTM A 210 Din 17175 St 35.8 Heat Exchanger Tube ASTM A 179 API Line Pipes API 5L Gr. B / PSL Gr x 52 ERW Boiler Tubes IBR BS 3059 / Part I 320 Size Range : 6 mm NB To 24' NB Thickness : SCH 40, SCH 80, SCH 160, SCH XXS length : 6 mtr & Double random Length.

We are Manufacturer, Stockist, Dealer, Trader, Supplier, Exporter and Vendor of Carbon Steel ASTM A- 106 GRB IBR Seamless Pipes in Bombay/ Mumbai.

Product Details:

We are the manufacturer, Trader and Stockist of ASTM PIPES. The offered pipes are designed with the help of supreme quality plastic and advanced techniques in adherence to set industry norms. Our offered pipes are widely used in various industries as water supply system. Clients can avail these pipes from us in different specifications of sizes and thickness for our clients with different choices.

Features:

• Smooth finish
• Crack resistance
• Durability

Product Details:

We are the Maufacturer, Exporter, Suppllier and Stockist of ASTM S3 GRADE A PIPES

Product Details:

We are the Manufacturer , Supplier and Stockist of Nickel Alloy Tubes.

Standard: ASTM / ASME SB 163 / 165 / 167 / 464/ 517 / 619 / 622 / 626 / 704 / 705.

Grade: UNS 2200 (NICKEL 200), UNS 2201 (NICKEL 201)

Range: 1 mm OD up to 254 mm OD in 0.2 TO 20 mm thickness.

Type: Seamless, ERW, Welded, CDW

Form: Round, Square, Rectangular, Coil, ‘U’ Shape

Others: Hydraulic Tube, Horn Tube, Capillary Tube, Boiler Tube, Precision Tube, IBR Tube

Length: Single Random, Double Random & Cut Length

End: Plain End, Beveled End, Threaded.