Hitech Metal And Tubes (ISO 90012008 Certified Co.)
Girgaon, Mumbai, Maharashtra
GST No. 27AHXPM4854C1ZW
TrustSEAL Verified
Call 0804897374990% Response Rate
SEND EMAIL
 

Coated Spiral Welded Saw Pipes

Offering you a complete choice of products which include liquid epoxy coatings spiral welded saw pipes, external varnish spiral welded saw pipes, coal tar tape coating spiral welded saw pipes, cement-mortar lining spiral welded saw pipes and epoxy based painting internal/external spiral weld saw pipe.

Liquid Epoxy Coatings Spiral Welded Saw Pipes

Liquid Epoxy Coatings Spiral Welded Saw Pipes
  • Liquid Epoxy Coatings Spiral Welded Saw Pipes
Get Best Quote
Approx. Price: Rs 70 / KilogramGet Latest Price
Product Brochure

Product Details:

Size3/4 inch, 1/2 inch, 2 inch, 1 inch
Unit Pipe Length6 meter, 9 meter, 18 meter, 3 meter
ShapeRound
Usage/ApplicationLiquid Epoxy Coatings Spiral Welded Saw Pipes
Country of OriginMade in India

Spiral SAW Pipes covering a range from 406 mm to 1626 mm diameter with wall thickness ranging from 5mm to 25mm conforming to IS 3589: 2001, IS: 5504, AP-5L, ASTM.

The raw material used in manufacture of Spiral SAW is H.R. Coil. It is continuously formed to require the specific diameter of the pipe, spirally welded at high speed and cut to required length. The following operations are carried out when the material is loaded for making of the pipe.

Entry Line :- Here the coils are opened, edge milled to required width and fed to forming stand at uniform speed. This unit also enhances the joining of the tail-end of the out going coil with the leading end of the incoming coil to produce continuous strips. Before initializing new campaign, entry line will be positioned in an angle, called Helical Angle in respect to the normal of forming table center axis.

Forming Stand :- The unit performs as the heart of the mill. Here the strip is formed to required size of the pipe & spirally welded.

Exit Line :- The main purpose of exit line is to give proper support to the pipe during forming, cut the pipe to required length and eject it outside.

The pipe is then visually inspected thoroughly, both in & out side, for probable weld defects such as under cut, porosity. If any defects found, it will be rectified as per the approved QAP (Quality Assurance Plan). After this the pipe will be sent to Beveling (Chamfering & Facing) machine for better quality pipe joints during laying works at site. Then the pipes are hydrostatically tested to ensure that there is no leakage from weld joint or parent material.

The pipe will be inspected at different stages of production to ensure the quality of the product. The inspection process consists of Physical / Visual Inspection, Destructive & Non-Destructive Testing & final inspection before sending for dispatch.

We execute various types of coating for preventing corrosion on pipe’s surface both internal as well as external as per IS, ISO and AWWA standards, which protects steel pipes against corrosion hence increases the pipe’s life.
Corrosion is the chemical disintegration of a substance into its component atoms due to its reaction with the environment. It is the degradation of metals commonly referred to as rust. Corrosion of metallic structures causes huge economic impacts around the world.
Various anti corrosion methods and techniques are devised and used that effectively minimize the impact of corrosion.

TYPES OF COATING:

We are engaged in providing high performance Anti Corrosive Coatings such as:-

1. Liquid epoxy coatings
Two part epoxy coating on the internal surface of the pipe provides a tough, protective coat with excellent hardness. Coating is done as per IS-3589, AWWA-C-210 with Air less spray Techniques.

Features:

  • Excellent adhesion on mild steels.
  • Good resistant to water, alcohol, solvents & chemicals
  • Good Mechanical Strength & abrasion resistance.
Request
Callback
Yes! I am interested

External Varnish Spiral Welded SAW Pipes

External Varnish Spiral Welded SAW Pipes
  • External Varnish Spiral Welded SAW Pipes
Get Best Quote
Approx. Price: Rs 70 / KilogramGet Latest Price
Product Brochure

Product Details:

Unit Pipe Length3 meter, 6 meter, 18 meter, 9 meter
BrandHitech Metal And Tubes (ISO 9001:2008 Certified Co.)
Size3/4 inch, 1/2 inch, 2 inch, 1 inch

Spiral SAW Pipes covering a range from 406 mm to 1626 mm diameter with wall thickness ranging from 5mm to 25mm conforming to IS 3589: 2001, IS: 5504, AP-5L, ASTM.

The raw material used in manufacture of Spiral SAW is H.R. Coil. It is continuously formed to require the specific diameter of the pipe, spirally welded at high speed and cut to required length. The following operations are carried out when the material is loaded for making of the pipe.

Entry Line :- Here the coils are opened, edge milled to required width and fed to forming stand at uniform speed. This unit also enhances the joining of the tail-end of the out going coil with the leading end of the incoming coil to produce continuous strips. Before initializing new campaign, entry line will be positioned in an angle, called Helical Angle in respect to the normal of forming table center axis.

Forming Stand :- The unit performs as the heart of the mill. Here the strip is formed to required size of the pipe & spirally welded.

Exit Line :- The main purpose of exit line is to give proper support to the pipe during forming, cut the pipe to required length and eject it outside.

The pipe is then visually inspected thoroughly, both in & out side, for probable weld defects such as under cut, porosity. If any defects found, it will be rectified as per the approved QAP (Quality Assurance Plan). After this the pipe will be sent to Beveling (Chamfering & Facing) machine for better quality pipe joints during laying works at site. Then the pipes are hydrostatically tested to ensure that there is no leakage from weld joint or parent material.

The pipe will be inspected at different stages of production to ensure the quality of the product. The inspection process consists of Physical / Visual Inspection, Destructive & Non-Destructive Testing & final inspection before sending for dispatch.

We execute various types of coating for preventing corrosion on pipe’s surface both internal as well as external as per IS, ISO and AWWA standards, which protects steel pipes against corrosion hence increases the pipe’s life.
Corrosion is the chemical disintegration of a substance into its component atoms due to its reaction with the environment. It is the degradation of metals commonly referred to as rust. Corrosion of metallic structures causes huge economic impacts around the world.
Various anti corrosion methods and techniques are devised and used that effectively minimize the impact of corrosion.

TYPES OF COATING:

We are engaged in providing high performance Anti Corrosive Coatings such as:-

Pipe varnish composition, after application form a thin film on steel pipe surfaces and after curing, forming a hard essentially non-oily film which protects steel pipes against corrosion during storage for substantial periods of time.
Request
Callback
Yes! I am interested

Coal Tar Tape Coating Spiral Welded SAW Pipes

Coal Tar Tape Coating Spiral Welded SAW Pipes
  • Coal Tar Tape Coating Spiral Welded SAW Pipes
Get Best Quote
Approx. Price: Rs 70 / KilogramGet Latest Price
Product Brochure

Product Details:

Unit Pipe Length18 meter, 3 meter, 6 meter, 9 meter
Size2 inch, 1/2 inch, 3/4 inch, 1 inch

Spiral SAW Pipes covering a range from 406 mm to 1626 mm diameter with wall thickness ranging from 5mm to 25mm conforming to IS 3589: 2001, IS: 5504, AP-5L, ASTM.

The raw material used in manufacture of Spiral SAW is H.R. Coil. It is continuously formed to require the specific diameter of the pipe, spirally welded at high speed and cut to required length. The following operations are carried out when the material is loaded for making of the pipe.

Entry Line :- Here the coils are opened, edge milled to required width and fed to forming stand at uniform speed. This unit also enhances the joining of the tail-end of the out going coil with the leading end of the incoming coil to produce continuous strips. Before initializing new campaign, entry line will be positioned in an angle, called Helical Angle in respect to the normal of forming table center axis.

Forming Stand :- The unit performs as the heart of the mill. Here the strip is formed to required size of the pipe & spirally welded.

Exit Line :- The main purpose of exit line is to give proper support to the pipe during forming, cut the pipe to required length and eject it outside.

The pipe is then visually inspected thoroughly, both in & out side, for probable weld defects such as under cut, porosity. If any defects found, it will be rectified as per the approved QAP (Quality Assurance Plan). After this the pipe will be sent to Beveling (Chamfering & Facing) machine for better quality pipe joints during laying works at site. Then the pipes are hydrostatically tested to ensure that there is no leakage from weld joint or parent material.

The pipe will be inspected at different stages of production to ensure the quality of the product. The inspection process consists of Physical / Visual Inspection, Destructive & Non-Destructive Testing & final inspection before sending for dispatch.

We execute various types of coating for preventing corrosion on pipe’s surface both internal as well as external as per IS, ISO and AWWA standards, which protects steel pipes against corrosion hence increases the pipe’s life.
Corrosion is the chemical disintegration of a substance into its component atoms due to its reaction with the environment. It is the degradation of metals commonly referred to as rust. Corrosion of metallic structures causes huge economic impacts around the world.
Various anti corrosion methods and techniques are devised and used that effectively minimize the impact of corrosion.

TYPES OF COATING:

We are engaged in providing high performance Anti Corrosive Coatings such as:-

Coal tar tap coating is done as per IS-3589, IS-15337, AWWA-C-203. First pipe is sand blasted as per ISO-8501, after that a coat of primer and then coal tar tape is wrapped with heating application. Coal tar tape consists of Glass Fiber tape & Coal tar.

Features:

  • Excellent resistance to heat, water
  • Resistance to Cathodic disbondment
Request
Callback
Yes! I am interested

Cement-Mortar Lining Spiral Welded SAW Pipes

Cement-Mortar Lining Spiral Welded SAW Pipes
  • Cement-Mortar Lining Spiral Welded SAW Pipes
Get Best Quote
Approx. Price: Rs 70 / KilogramGet Latest Price
Product Brochure

Product Details:

Unit Pipe Length3 meter, 18 meter, 6 meter, 9 meter
Size3 inch, 2 inch, 1/2 inch, 3/4 inch, 1 inch
Steel Grade300

Spiral SAW Pipes covering a range from 406 mm to 1626 mm diameter with wall thickness ranging from 5mm to 25mm conforming to IS 3589: 2001, IS: 5504, AP-5L, ASTM.

The raw material used in manufacture of Spiral SAW is H.R. Coil. It is continuously formed to require the specific diameter of the pipe, spirally welded at high speed and cut to required length. The following operations are carried out when the material is loaded for making of the pipe.

Entry Line :- Here the coils are opened, edge milled to required width and fed to forming stand at uniform speed. This unit also enhances the joining of the tail-end of the out going coil with the leading end of the incoming coil to produce continuous strips. Before initializing new campaign, entry line will be positioned in an angle, called Helical Angle in respect to the normal of forming table center axis.

Forming Stand :- The unit performs as the heart of the mill. Here the strip is formed to required size of the pipe & spirally welded.

Exit Line :- The main purpose of exit line is to give proper support to the pipe during forming, cut the pipe to required length and eject it outside.

The pipe is then visually inspected thoroughly, both in & out side, for probable weld defects such as under cut, porosity. If any defects found, it will be rectified as per the approved QAP (Quality Assurance Plan). After this the pipe will be sent to Beveling (Chamfering & Facing) machine for better quality pipe joints during laying works at site. Then the pipes are hydrostatically tested to ensure that there is no leakage from weld joint or parent material.

The pipe will be inspected at different stages of production to ensure the quality of the product. The inspection process consists of Physical / Visual Inspection, Destructive & Non-Destructive Testing & final inspection before sending for dispatch.

We execute various types of coating for preventing corrosion on pipe’s surface both internal as well as external as per IS, ISO and AWWA standards, which protects steel pipes against corrosion hence increases the pipe’s life.
Corrosion is the chemical disintegration of a substance into its component atoms due to its reaction with the environment. It is the degradation of metals commonly referred to as rust. Corrosion of metallic structures causes huge economic impacts around the world.
Various anti corrosion methods and techniques are devised and used that effectively minimize the impact of corrosion.

TYPES OF COATING:

We are engaged in providing high performance Anti Corrosive Coatings such as:-

2. Cement-mortar lining
Cement-mortar lining is done inside surface of pipe, and is commonly used for water distribution. Coating done as per IS-3589, AWWA-C-205 & C 602 or as per Custom-specified mix.

The mix is centrifugally applied to straight pipe 20 through 64 inch in diameter and from 6 to 12.2 meter in length using our custom-designed state-of-the-art equipment.

Features:

  • Very compatible to alkaline influences.
  • Protects pipes from corrosion and thus increases its life.
  • Abrasion Resistance
Request
Callback
Yes! I am interested

Epoxy Based Painting Internal/External Spiral Weld SAW Pipe

Epoxy Based Painting Internal/External Spiral Weld SAW Pipe
  • Epoxy Based Painting Internal/External Spiral Weld SAW Pipe
Get Best Quote
Approx. Price: Rs 70 / KilogramGet Latest Price
Product Brochure

Product Details:

Unit Pipe Length3 meter, 18 meter, 6 meter, 9 meter
Size3 inch, 2 inch, 1/2 inch, 3/4 inch, 1 inch
BrandHi Tech

Spiral SAW Pipes covering a range from 406 mm to 1626 mm diameter with wall thickness ranging from 5mm to 25mm conforming to IS 3589: 2001, IS: 5504, AP-5L, ASTM.

The raw material used in manufacture of Spiral SAW is H.R. Coil. It is continuously formed to require the specific diameter of the pipe, spirally welded at high speed and cut to required length. The following operations are carried out when the material is loaded for making of the pipe.

Entry Line :- Here the coils are opened, edge milled to required width and fed to forming stand at uniform speed. This unit also enhances the joining of the tail-end of the out going coil with the leading end of the incoming coil to produce continuous strips. Before initializing new campaign, entry line will be positioned in an angle, called Helical Angle in respect to the normal of forming table center axis.

Forming Stand :- The unit performs as the heart of the mill. Here the strip is formed to required size of the pipe & spirally welded.

Exit Line :- The main purpose of exit line is to give proper support to the pipe during forming, cut the pipe to required length and eject it outside.

The pipe is then visually inspected thoroughly, both in & out side, for probable weld defects such as under cut, porosity. If any defects found, it will be rectified as per the approved QAP (Quality Assurance Plan). After this the pipe will be sent to Beveling (Chamfering & Facing) machine for better quality pipe joints during laying works at site. Then the pipes are hydrostatically tested to ensure that there is no leakage from weld joint or parent material.

The pipe will be inspected at different stages of production to ensure the quality of the product. The inspection process consists of Physical / Visual Inspection, Destructive & Non-Destructive Testing & final inspection before sending for dispatch.

We execute various types of coating for preventing corrosion on pipe’s surface both internal as well as external as per IS, ISO and AWWA standards, which protects steel pipes against corrosion hence increases the pipe’s life.
Corrosion is the chemical disintegration of a substance into its component atoms due to its reaction with the environment. It is the degradation of metals commonly referred to as rust. Corrosion of metallic structures causes huge economic impacts around the world.
Various anti corrosion methods and techniques are devised and used that effectively minimize the impact of corrosion.

TYPES OF COATING:

We are engaged in providing high performance Anti Corrosive Coatings such as:-

Epoxy Zinc rich primer provides outstanding performance in highly corrosive environment. Metallic Zinc imparts cathodic protection to the base metal. This can be Top-Coated with Epoxy Paints, Polyurethane paints, and enamel paints for specific applications with Air less spray Techniques.

Features:
• Provides excellent adhesion on cleaned steel work.
• Excellent corrosion resistance
• Good abrasion resistance
Request
Callback
Yes! I am interested
X

Explore More Products

View All Products




Reach Us
H Mehta (Director)
Hitech Metal And Tubes (ISO 90012008 Certified Co.)
106, 1st Floor, Shreepati Castle, C Wing, Kethwadi Main Road
Girgaon, Mumbai - 400004, Maharashtra, India


Hitech Metal And Tubes (ISO 90012008 Certified Co.)
Call Us


Send E-mail