|Unit Pipe Length||3 meter, 6 meter, 9 meter|
|Features||Anealed, Pickled, Polished|
|Size||1/2 inch, 3/4 inch, 1 inch, 2 inch|
|Unit Pipe Length||6 meter, 9 meter, 3 meter, 18 meter|
|Size||1/2 inch, 3 inch, 2 inch, 1 inch, 3/4 inch|
|Brand||Hitech Metal And Tubes (ISO 9001:2008 Certified Co.)|
Grades as under:
Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601)
Grades as under:
Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500)
Grades as under:
Hastelloy C 276 (UNS No. N10276), Hastelloy C 22, Hastelloy C 2000
|Single Piece Length||18 meter, 36 meter, 6 meter, 3 meter|
|Application||Utilities Water, Food Products, Drinking Water, Gas Handling, Chemical Handling|
|Size/Diameter||2 inch, 1 inch, 1/2 inch, 3 inch|
We, Hi-tech Metal and tubes have been able to establish ourselves as a prominent figure in this industry for offering wide gamut of Hastelloy Pipe. These pipes are widely demanded for fitting purpose in different industries and construction areas. Our offered pipes are manufactured using high grade material and cutting-edge tools in adherence to set industry norms as per the set industry norms. We offer these pipes to our clients in different sizes and length as per their needs.
Hastelloy is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments. The high nickel and molybdenum contents make the nickel steel alloy especially resistant to pitting and crevice corrosion in reducing environments while chromium conveys resistance to oxidizing media. The low carbon content minimizes carbide precipitation during welding to maintain corrosion resistance in as-welded structures. This nickel alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process application in an as welded condition.
Although there are several variations of the Hastelloy nickel alloy, Hastelloy C-276 is by far the most widely used.
Alloy C-276 is widely used in the most severe environments such as chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment, and recovery of sour natural gas.
Corrosion Resistant Hastelloy
Considered one of the most versatile corrosion resistant alloys available, Hastelloy C-276 exhibits excellent resistance in a wide variety of chemical process environments including those with ferric and cupric chlorides, hot contaminated organic and inorganic media, chlorine, formic and acetic acids, acetic anhydride, seawater, brine and hypochlorite and chlorine dioxide solutions. In addition, alloy C-276 resists formation of grain boundary precipitates in the weld heat affected zone making it useful for most chemical processes in the as-welded condition. This alloy has excellent resistance to pitting and stress corrosion cracking.
What are the characteristics of Hastelloy C276?
Chemical Composition, %
|Remainder||15.0-17.0||14.5-16.5||4.0-7.0||3.0-4.5||2.5 max||1.0 max||.01 max|
|.35 max||.04 max||.03 max||.08 max|
|Single Piece Length||36 meter, >36 meter, 18 meter, 6 meter, 3 meter|
|Size/Diameter||2 inch, 4 inch, 1 inch, 1/2 inch, 3 inch|
We Hi-Tech Metal & Tubes offer a wide range of inconel pipes made of quality raw material procured from reliable vendors. Known for its high quality, durability and high utility these inconel pipes are widely used in various industries across the globe.
Standards: ASTM / ASME SB 163 / 167 / 517 / 704 / 705
UNS N06600 (Inconel 600), UNS N06601 (Inconel 601), UNS N06625 (Inconel 625), UNS N07718 (Inconel 718), UNS N07751 (Inconel X-750), UNS N08800 (Inconel 800), UNS N08810/11 (Incoloy 800H), UNS N08825 (Incoloy 825)
Seamless / ERW / Welded/ Fabricated
Round, Square, Rectangular, Hydraulic Etc.
Plain End, Beveled End, Threaded
We manufacture and offer various types of inconel flanges that are provided in ANSI, DIN, JIS, BS and ASME standards. These inconel flanges are available in following sizes and specifications:
Production standard: ANSI/ASME B16.5, ANSI B16.47... API, DIN, JIS, BS,
Size: 1/2 inch - 48 inch (15mm - 1200mm)
Inconel 600 / 601 / 625 / 718 / X-750 / 800 / 800H / 825
Weld Neck, Slip On, Blind, Socket Weld, Lap Joint, Spectacles, Ring Joint, Orifice, Long Weld Neck, Deck Flange, etc.
150#, 300#, 400#, 600#, 900#, 1500# & 2500#
Inconel Bars and Rods
We are the prominent supplier and exporter of inconel round bars. Our inconel round bar are well Known for its quality, durability and high tolerance.
ASTM / ASME SB 425, ASTM / ASME SB 166 , ASTM / ASME SB 446
Inconel 600 / 601 / 625 / 718 / X-750 / 800 / 800H / 825
|Application||Chemical Handling, Utilities Water, Drinking Water, Gas Handling|
|Size/Diameter||1 inch, 1/2 inch, 3 inch, 2 inch|
To fulfill the diverse demands for quality monel alloy products, we are involved in offering supreme quality Monel Pipe that has high demand graph in current market scenario. These pipes are manufactured using premium quality monel alloy procured from trustworthy vendors. Monel alloy is a rare composition of copper and nickel metals and highly corrosion resistant. The offered pipe is widely used in various industrial and commercial purposes. Our valuable clients can avail the monel pipe in specific shapes and sizes as per client's demand at reasonable prices.
|Size/Diameter||1/2 inch, 3 inch, 2 inch, 1 inch|
To fulfill the diverse demands for quality monel alloy products, we are involved in offering supreme quality Monel Tube that has high demand graph in current market scenario. These pipes are manufactured using premium quality monel alloy procured from trustworthy vendors. Monel alloy is a rare composition of copper and nickel metals and highly corrosion resistant. The offered pipe is widely used in various industrial and commercial purposes. Our valuable clients can avail the monel pipe in specific shapes and sizes as per client's demand at reasonable prices.
|Single Piece Length||6 meter, 36 meter, 18 meter, 3 meter|
|Application||Gas Handling, Utilities Water, Chemical Handling, Drinking Water|
|Size/Diameter||3 inch, 2 inch, 1 inch, 1/2 inch|
|Size||0-1 inch, 10-20 inch, 5-10 inch, 1-5 inch|
|Length||4.5 to 6 m|
We can offer Nickel Alloy 600/625 Tubing in random lengths of up to 6meters long or cut to a specific length as ordered. Inconel pipes and tubes are largely used for piping in Chemical Industry, Pulp, & Paper Manufacturing, Heat Exchangers, Process Piping.
Alloy 600 or Inconel 600, is one of the most popular high temperature alloy and is commonly identified as UNS N06600. Inconel 600 is a non-magnetic nickel-chromium alloy, with features of excellent corrosion resistance and mechanical properties, in addition to good weldability under a wide range of temperatures.
Inconel 601 is a nickel-chromium alloy, with an addition of aluminum, which exhibits excellent resistance to high temperature oxidation. The addition of aluminium allows it to demonstrate high mechanical properties even in extremely hot environments.
Inconel 625 is a nickel-chromium-molybdenum alloy, with addition of niobium that acts with the molybdenum to strengthen the alloy’s matrix, resulting in outstanding strength and toughness. Inconel 625 offers high resistance to pitting and crevice corrosion, making it a ideal alloy in chemical processing, marine engineering, oil and gas, and offshore industries.
Inconel 718 is a precipitation-hardenable nickel-chromium alloy, with higher levels of iron, molybdenum, and niobium as well as smaller contents of titanium and aluminium. Used in steam turbines, acid environments, and nuclear engineering, Alloy 600 exhibits high yield strength, and creep-rupture properties at high temperatures.
Alloy 600/625 seamless pipes and tubing’s are available in both OD and NB sizes. In addition to standard sizes, which are available in stock, our specialty is to manufacture and supply custom size Alloy 600 cold drawn seamless tubing’s from our factory.
Our Alloy 800HT/825 tube products can be offered in seamless, welded or welded and cold drawn form, depending on the alloy you require. Our Alloy 800HT/825 seamless and welded tubes size range starts at 1/2” NB or OD size and goes up to 6″ NB and OD.
We can offer Nickel Alloy 800HT/825 Tubing in random lengths of up to 6meters long or cut to a specific length as ordered. Incoloy pipes and tubes are largely used for piping process systems.
Incoloy 800, Incoloy 800H and 800HT, are all nickel-iron-chromium alloys, with similar basic composition. However, Incoloy 800 differs from the other two alloys, due to the higher level of carbon in alloy 800H, and the addition of up to 1.20% aluminum and titanium in alloy 800HT. The high nickel and chromium contents of Incoloy 800H, 800HT and 800 ensure excellent resistance to oxidation. Incoloy 800 is primarily used in applications with temperatures up to 1100° F, where alloys 800H and 800HT are normally used in temperatures above 1100° F where resistance to creep and rupture is required.
Incoloy 825 is a nickel-iron-chromium alloy, with addition of molybdenum and copper, exhibiting excellent corrosion resistance in both reducing and oxidizing media. Alloy 825 offers good mechanical properties at both room and elevated temperatures, up to approximately 550???.
Alloy 800HT/825 seamless pipes and tubing’s are available in both OD and NB sizes. In addition to standard sizes, which are available in stock, our specialty is to manufacture and supply custom size Alloy 800HT/825 cold drawn seamless tubing’s from our factory.
|Application||Drinking Water, Utilities Water, Food Products|
|Single Piece Length||3 meter, 36 meter|
|Size/Diameter||2 inch, 4 inch, 1/2 inch, 1 inch|
Nickel 200/201 Pipes , Nickel 201 Tubing, Uns N02200
Our Alloy 200/201 tube products can be offered in seamless, welded or welded and cold drawn form, depending on the alloy you require. Our Alloy 200/201 seamless and welded tubes size range starts at 1/2” NB or OD size and goes up to 6″ NB and OD.
We can offer Nickel Alloy 201 Tubing in random lengths of up to 6meters long or cut to a specific length as ordered. Nickel 200/201 pipes and tubes are largely used for piping in the caustic soda, food processing and hydrochloric plants.
With regards to the difference between Nickel 200 and Nickel 201, Nickel 201 carries lower carbon content resulting in lower hardness. The lower carbon content in Nickel 201 also makes the material more resistant to graphitization and also helps in preventing embrittlement. Nickel 200 is generally used for service up to 570° F (300 °C) to 600° F, meanwhile Nickel 201 is generally approved for service up to 1200° F to 1230° F.
Alloy 200, 201 seamless pipes and tubing’s are available in both OD and NB sizes. In addition to standard sizes, which are available in stock, our specialty is to manufacture and supply custom size Nickel 200, 201 cold drawn seamless tubing’s from our factory.Specifications for Nickel Alloy 200/201 Seamless Pipes, Alloy 201 Tubing’s, UNS N02200, UNS N02201, WNR 2.4066, 2.4068
Nickel 200 / 201 Seamless Pipes and Tubes: ASTM B163, ASTM B161, ASME SB161, and ASME SB163
Nickel 200 / 201 Welded Pipes and Tubes: ASTM B725, ASTM B730, ASME SB725, and ASME SB730Nickel Alloy 200/201 Seamless Pipes, Alloy 201 Tubing’s, UNS N02200, UNS N02201, WNR 2.4066, 2.4068 Supply, Stock Range
We can offer ex-stock supply of most of the standard size Nickel Alloy 200/201 alloy pipes and Nickel Alloy 200/201 tubes. Custom size (thickness x OD) Nickel Alloy 200/201 pipes can be offered with short delivery times to meet the most demanding requirements of our customers.
|Single Piece Length||6 meter, 3 meter, 36 meter|
|Size/Diameter||1 inch, 1/2 inch, 3 inch, 4 inch, 2 inch|
INCONEL Alloy 600 (UNS N06600 W.Nr. 2.4816) is a standard engineering material for applications which require resistance to corrosion and heat. This Inconel Pipes & tubes also has excellent mechanical properties and presents the desirable combination of high strength and good workability. The versatility of INCONEL alloy 600 has led to its use in a variety of applications involving temperatures from cryogenic to above 2000°F (1095°C).
6.0 – 10.0
1413 °C (2580 °F)
Psi – 95,000 , MPa – 655
Yield Strength (0.2%Offset)
Psi – 45,000 , MPa – 310